Table of Contents
Advertisement
BOS1901-KIT
User Guide
Use Audacity to Play WAV Files
C.2
Description
Download waveform samples from Boréas website and use Audacity® to play them on the BOS1901-KIT.
Prerequisites
• BOS1901-KIT board is in Audio mode. Refer to section 8.5.2 for more information regarding Audio
mode.
• Using the BOS1901-KIT software, user has configured the audio limiting settings of the board (see
details here)
• Download the waveform examples from the Boréas web site (link)
4
Steps
1. Start Audacity software.
2. Select the Speakers (Boreas DevKit) from the playback device selection menu.
If the Boreas DevKit is not shown in the list, validate that the device kit in in audio mode and that
it is connected to the PC. Then from the Audacity menu, click on Transport / Rescan Audio
Devices.
3. Drag the desired WAV file (Ex: TDK_60Vrange_oneactuator.wav) into Audacity to add a new
audio track.
4. Press the play button to start playing the waveform on the piezo actuator.
BT001DDK04.01 – Issue 1
Figure 39: Use audacity to play a WAV file
© All rights reserved 2021 Boréas Technologies Inc
2
54
Advertisement
Table of Contents
