Table of Contents
Advertisement
BOS1901-KIT
User Guide
4
Board Overview
The purpose of this section is to show the location of the components that allow you to interact with
the BOS1901-KIT board. This section is in a way the definition of the user interface provided by the
development board. The focus is on buttons and LEDs which allow you to know and modify the current
operating state.
Table 4: BOS1901-KIT board user interface
Components
A
USB connector
B
Operation mode LED
C
BOS1901 error LED
D
Change operation mode button
E
Reset button
F
GPIO to trigger haptic feedback
G
BOS1901 A/B status LED
H
BOS1901 A/B terminal block
BT001DDK04.01 – Issue 1
Figure 2: BOS1901-KIT board user interface
Name
Supply power and provides connectivity with the GUI.
Flashing if alive and color shows the current operation mode.
Flashing if an error is detected on a BOS1901.
Change the current operation mode on press.
Reset the micro-controller on press.
If configured as a haptic trigger event, a falling edge on that
GPIO will trigger a haptic feedback on a piezo actuator.
LEDs displaying the current state of the BOS1901.
Terminals where piezoelectric actuator are connected.
© All rights reserved 2021 Boréas Technologies Inc
Description
4
Advertisement
Table of Contents
