Boreas Technologies BOS1901-KIT-B02 User Manual page 30

BOS1901-KIT
User Guide
9.3 Piezo Actuators
One TDK actuator is provided with the BOS1901-KIT Starter Set and four with the Premium Set, one
from Bimitech and the others from TDK. For each piezoelectric actuator available with the BOS1901-
KIT, Boréas provides recommended presets. Each preset is available in the GUI and is identified by the
brand and model number of the piezo actuator.
9.3.1 Bimitech Actuator
Bimitech PUA3020-5H200 piezo actuator specifications:
Type
Polarity
Range
9.3.2 TDK Actuator
TDK PowerHap™ 0909H011V060 piezo actuator specifications:
Type
Polarity
Range
TDK Mini PowerHap™ 1204H018V060 specifications:
Type
Polarity
Range
TDK Mini PowerHap™ 0904H014V060 specifications:
Type
Polarity
Range
It is of utmost importance to not use the TDK PowerHap™ actuators outside their specified ranges as
they can get damaged unless the waveform is properly designed to limit the output voltage between
-10 V and +60 V. Example waveforms are provided on Boréas website (www.boreas.ca/bos1901-kit).
BT001DDK04.01 – Issue 1
Bender
Red wire on "OUT+" terminal
Black wire on "OUT-" terminal
-90 V to +160 V
Cymbal design
Red wire on "OUT+" terminal
Black wire on "OUT-" terminal
Unipolar -10 V to +60 V
Cymbal design
Red wire on "OUT+" terminal
Black wire on "OUT-" terminal
Unipolar -10 V to +60 V
Cymbal design
Red wire on "OUT+" terminal
Black wire on "OUT-" terminal
Unipolar -10 V to +60 V
© All rights reserved 2021 Boréas Technologies Inc 30