Table of Contents
Advertisement
BOS1901-KIT
User Guide
To change the audio limiting configuration, open the BOS1901-KIT software while the board is in
audio mode and set the Min and or Max values of the Amplitude field and press the Save button to
send the new values to the BOS1901-KIT.
8.5.2.3 Audio Limiting Illustrated
Original signal without audio limiting:
Figure 15:Original audio signal
Same signal with audio limiting set between -10 V to 60 V:
Figure 16:Audio signal with audio limiting
BT001DDK04.01 – Issue 1
© All rights reserved 2021 Boréas Technologies Inc
22
Advertisement
Table of Contents
