BOS1901-KIT
User Guide
To create the waveform with the parameters mentioned in the description, use the following
tone values:
The amplitude value is calculated with the following formula:
Amplitude =
5. Use dc-offset plugin to offset the signal in the piezo range:
Offset computation:
From the application menu, select Effect / DC offset... and enter the value calculated above.
6. Play the wave using the play button.
BT001DDK04.01 – Issue 1
Figure 41: Tone parameters
Peak to Peak Amplitude
+
Figure 42: Add dc-offset
© All rights reserved 2021 Boréas Technologies Inc
( 60 ) V − ( −10 )
=>
=> 0.368
190
60 + (−10 )
=>
190
= > 0.263
56