Table of Contents
Advertisement
BOS1901-KIT
User Guide
8
Boréas Development Kit Software v2.9.x
8.1
Overview
Boréas Development Kit software is a desktop application intended to ease evaluation of the BOS1901.
In Haptic mode, the tool can be used to:
• Play a sinusoidal waveform on-demand.
• Configure the BOS1901-KIT board to play a sinusoidal waveform when:
o a signal is received on the pin IO1.
o press and release events are detected on a piezo actuator (button emulation).
• Have a read/write access to the registers of the BOS1901.
• Monitor the BOS1901 status and display any error.
• Reset the BOS1901-KIT board to its factory default state.
• Change the operation mode of the BOS1901-KIT board.
In Audio mode, the tool can be used to:
• Configure the minimum and maximum voltage of each output channel.
• Reset the BOS1901-KIT board to its factory default state.
• Change the dev kit operation mode.
8.2
PC Requirements
• OS: Windows 10
• Minimum display resolution: 1366 X 768
• Storage: At least 200 MB of available space.
8.3
Software Installation
Refer to the section Get Started.
BT001DDK04.01 – Issue 1
© All rights reserved 2021 Boréas Technologies Inc
11
Advertisement
Table of Contents
