Disconnected State - Boreas Technologies BOS1901-KIT-B02 User Manual

BOS1901-KIT
User Guide
8.4

Disconnected State

At start-up, the application is in disconnect state. The communication port is not connected with the
BOS1901-KIT board. A drop-down list allows the user to select the BOS1901-KIT board to use. (1 entry
per board connected to the PC).
To transition to the connected state:
1. Select the communication port associated to the BOS1901-KIT board.
2. Press the Connect to port button to establish the communication.
Upon connection, the compatibility between the application and the board firmware will be validated
and a message dialog will appear if the firmware of the kit needs to be updated. (More details are
provided in the section
The application will automatically return to the disconnected state if:
• The connection with the BOS1901-KIT board is lost.
• The BOS1901-KIT board power cycles.
• The BOS1901-KIT board is returned to factory default.
• The user presses the mode change button on the BOS1901-KIT application.
• The user presses the mode change button on the BOS1901-KIT board.
BT001DDK04.01 – Issue 1
Figure 5 Application window in disconnected state
Upgrade your development kit
© All rights reserved 2021 Boréas Technologies Inc
firmware).
12