Startup; Mounting The Draft Shield; Connecting The Scale To Ac Power - Sartorius G 150 D Installation And Operating Instructions Manual

Startup

Mounting the Draft Shield

Place the draft shield on the scale.
Use a screwdriver to mount the draft shield in position, and insert the
base plate in the weighing chamber (14).
Install components (4 - 1) in the weighing chamber.

Connecting the scale to AC Power

The scale is powered by an AC adapter. Make sure that the voltage
rating printed on this unit is identical to your local line voltage rating.
lf the voltage rating specified on the AC adapter or the plug design
does not match the rating or Standard you use, please contact your
Sartorius dealer.
Important Note
Only use original Sartorius AC adapters identified by the Sarto-
rius label. Use of AC adapters supplied by other manufacturers,
even if these have a registered approval rating from a national
testing laboratory, requires the consent of a certified Sartorius
technician.
Plug the cord of the AC adapter into the power
receptacle of the scale and secure the connection
by tightening the knurled
8