Cleaning; Safety Instructions For Cleaning - Bartscher 200065 Quick Start Manual

Cleaning

Overheating/Dry-Run Protection
The appliance is equipped with an overheating/dry-run protection.
In case of an accidental start-up without water or with its insufficient amount, the
protection will be activated and the appliance will be automatically switched off.
1. Wait for the appliance to cool down.
2. Pour the liquid remaining in the tank into another
container, using the drain tap.
3. Press the RESET button underneath the appliance.
4. Then, you may pour the required beverages and start
the appliance as usual.
Switching the Appliance OFF
1. If the appliance is not in use any more, rotate the temperature controller
counter-clockwise to ► position (or switch the function switch up to OFF
position).
2. Disconnect the appliance from the mains socket (pull the plug out).
3. Wait for the appliance to cool down.
4. Pour the liquid remaining in the tank into a suitable container, using the drain
tap.
6 Cleaning
6.1

Safety Instructions for Cleaning

•
Before cleaning, disconnect the appliance from the power supply.
•
Leave the appliance to cool down completely.
•
Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
•
Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
•
For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
200065
Fig. 5
EN
15 / 16