Operation - Bartscher 200065 Quick Start Manual

Power supply connection
•
Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
•
Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•
The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
•
Do not use the appliance with an external timer or remote control.
5.2

Operation

Risk of burning!
The pot and lid heat up considerably during operation.
Do not touch the hot appliance.
EN
Risk of scalding!
Hot steam coming out when the lid is removed may cause scalding of
hands, arms and face.
Never remove the lid when the appliance is operating.
In order to add liquids, first switch the appliance off and then carefully
remove the lid, using the lid handle.
Before Use
1. Before use, clean the appliance, observing instructions in section 6 'Cleaning'.
2. Before filling up with liquids and connecting the appliance, rotate the
temperature controller counter-clockwise to the position marked with ►.
3. Switch the function switch to OFF position (top position, Fig. 3).
4. Pour required amount of drinkable liquids into the appliance (only up to 'MAX'
mark).
WARNING!
Prior to switching the appliance on, it is important to have the tank filled
with a potable liquid. Do not fill the appliance with any non-potable liquids,
like acids, lyes, oils, nitrates, etc.
12 / 16
WARNING!
Installation and operation
200065