Printing A Summary Of Configuration Settings - GE Corometrics 170 Series Service Manual

Printing a Summary of Configuration Settings

Revision C
Setup Procedures: Customizing the Monitor
To print the software version number and a summary of configuration settings on
the strip chart paper:
NOTE: You can only enter the service setup mode from a power off state.
1. Enter the service mode:
Press and hold the
Press and hold the blue
Release both buttons. The service mode is now activated.
2. Press the button
Record
Figure 4-13. Configuration Summary Printout
170 Series Monitor
2000947-004
button
Setup
Power button .
. Figure 4-13 shows a sample printout.
4-17