Turning The Monitor On - GE Corometrics 170 Series Service Manual

Turning the Monitor On

Revision C
Setup Procedures: Turning the Monitor On
The 170 Series uses a universal AC-to-DC converter which accepts an AC input in
the range 100–230 VAC. The converter supplies a regulated 12 Vdc to the 170
Series Monitor.
1. Connect the AC adapter into the power supply connector labeled:
GE MEDICAL SYSTEMS REF 7714AAT ONLY
Figure 4-9. Connecting the AC Adapter
2. Connect one end of the detachable line cord to the AC adapter; connect the
other end into a hospital grade grounded wall outlet.
3. Press the monitor's
Power
illuminates. A self-test routine automatically runs. Read
Routines" on the next page.
Figure 4-10. Turning the Monitor On
170 Series Monitor
2000947-004
.
button . The green indicator next to the button
CONNECT TO
"Monitor Self-Test
4-7