Rear Panel Connectors - GE Corometrics 170 Series Service Manual

Rear Panel Connectors

CONNECT TO:
GE MEDICAL SYSTEMS
REF 7714AAT ONLY
Power Supply Connector
Remote Mark Connector
Remote Mark Connector
3-14
Controls, Indicators, and Connectors: Rear Panel Connectors
Figure 3-7. Rear Panel Connectors
This is the receptacle for the AC adapter, P/N 7714AAT only. A line cord connects
from the other end of the adapter to an AC wall outlet. The connector is labeled
CONNECT TO GE MEDICAL SYSTEMS REF 7714AAT ONLY
universal AC-to-DC converter which can accept an AC input in the range 100–230
VAC. The converter supplies a regulated 12 Vdc to the monitor.
This connector is provided for attaching an optional Corometrics Model 146 Fetal
Acoustic Stimulator (FAST). The annotation
the Model 146 is used.
This connector is provided for attaching an optional Corometrics Remote Event
Marker. This accessory annotates the strip chart recorder paper with a marker which
can be configured as one of the following:
: This annotation is commonly used to record an "event."
F M
: This annotation is commonly used as an indication that the mother has
perceived fetal movement.
The monitor is factory set to use the
Procedures" for information about selecting the annotation.
170 Series Monitor
2000947-004
RS232 RS232
1 2
. The power supply is a
prints on the strip chart each time
F M
annotation. Refer to the "Chapter 4, Setup
Revision C