Table of Contents
Advertisement
3 Using Your USB Devices On The Network
Overview
In this section, you will learn how to use your USB devices via the Keyspan USB Server. You will
learn to:
• connect your USB device (hardware) to the Keyspan USB Server's USB port
• virtually connect to your USB device using the Keyspan USB Server software
• use your USB device via the Keyspan USB Server
Tech Note: These instructions are intended to help you connect a USB device (ie
printer, scanner, etc.) to the USB Server for the very first time. It is highly
recommended that you only connect one USB device at this time. To connect
additional devices, repeat these instructions for each device.
Using Your First USB Device
Step 1
-
Connecting Your USB Device To The USB Server
Before using the Keyspan USB Server, connect your USB device to any USB port on the Keyspan
USB Server.
Tech Note: USB Lights: US-4A Only: Above each USB port is a green LED
light (for a total of 4 lights). These lights indicate whether or not your USB device is
supported in the current software/firmware. If your device is supported, you will have a
solid green light. If you have a slow blinking light, your USB device is not currently
supported. Please contact Keyspan if you have a slow blinking light.
Once your USB device is connected to the USB Server, open the Keyspan Server Utility
application.
This User Manual applies to the Keyspan USB Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23
Keyspan:USB Server - User Manual
• using the Connect and Disconnect buttons
• using the Auto Connect Feature for Printers on Windows
• using the Auto Connect Feature for Printers on Mac OS X
Page 8
Advertisement
Table of Contents
