Keyspan USB Server Version 1.3.1 User Manual page 39

Personal Communication Settings
The Personal Communication Settings in the Local Settings tab, shows the following
information:
Client Name:
UDP Port:
Multicast Address:
This User Manual applies to the Keyspan USB Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23
Keyspan:USB Server - User Manual
This is the client name that is broadcast to the USB Server and to other
users on the network. The default name is the computer name that you
specified when you first setup to your computer. You can enter a
different Client Name in this field.
This is the UDP Port number that the Keyspan Server Utility software
will use to discover USB Server hardware on your network. The default
value is 3842. If your USB Server hardware is set to broadcast on a
different port number (ie 3841), you will need to change the UDP port
number here.
This is the Multicast Address that the Keyspan Server Utility software
will use to discover USB Server hardware on your network. The default
value is 239.255.176.42. If your USB Server hardware is set to
Page 39