Keyspan USB Server Version 1.3.1 User Manual page 5

Step 3
-
Insert the Keyspan USB Server CD-ROM
Turn your computer ON. When your computer starts up, place the Keyspan USB Server CD into
the CD-ROM drive.
MACINTOSH NOTE:
When the CD icon appears on your desktop, double click on its icon to display its contents.
Locate the Keyspan USB Server Installer icon and double click to start the installation
process. Follow the instructions on screen.
WINDOWS NOTE:
Windows will automatically open the Keyspan CD Browser window. Using the on-screen
menus, locate the Keyspan USB Server Installer selection and click it to start the installation
process. Follow the instructions on screen.
WINDOWS Tech Note: During and/or after the software installation, the Windows
New Hardware Wizard may ask you to install software several times. Select
'Install the software automatically' and click next until the New Hardware Wizard tells
you that the installation is finished. PLEASE NOTE that you will not be able to use your
USB Server until you complete the New Hardware Wizard process.
Step 4
-
Running the Keyspan Server Utility application
Once the Keyspan installer completes, it will automatically launch the Keyspan Server Utility
application. You will use this utility to configure the USB Server.
Tech Note: Firmware Update: The first time you launch the USB Server program,
you may be asked to update your USB Server's firmware. If you get this message,
please update your firmware as per the on screen instructions. Please note that you
can also find instructions on how to do this in the Updating Your Firmware subsection in
the Changing USB Server's Settings section later in this manual.
In the Keyspan USB Server window, click the Servers tab. You will now see your USB Server
listed in this tab (see next image):
This User Manual applies to the Keyspan USB Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23
Keyspan:USB Server - User Manual
Page 5