Status Light Behavior - Keyspan USB Server Version 1.3.1 User Manual

Status Light Behavior

The Keyspan USB Server part number US-4A/US-4A comes equipped with a 10 Status LED
lights that report the status of the Keyspan hardware (see next image).
The meaning of these lights will change depending on whether the USB Server is booting up (ie
you've just turned on the USB Server) or if it is running (and has finished booting up).
The two tables on the following pages shows all of the possible states of these LED light and what
they mean.
Note:
If you are having problems with your USB Server, please use this information in
conjunction with our Troubleshooting section to diagnose the problem. If you still need
assistance, please contact Keyspan technical support.
While the USB Server is booting up, please refer to the following table for detailed description of
the server's status lights:
This User Manual applies to the Keyspan USB Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23
Keyspan:USB Server - User Manual
Page 61