Table of Contents
Advertisement
In the USB Devices tab, the following information is shown:
Available:
Connected:
In Use By [x]:
Auto-Connected:
This User Manual applies to the Keyspan USB Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23
Keyspan:USB Server - User Manual
The USB Device is available for use by any computer. To use this
device, click the
green
Once you connect to the device, the status message will change to
Connected. If someone else uses the device, you will see the In Use
By [x] status.
The USB device is connected to your computer. When the Status is
set to Connected, you have exclusive access to that USB device.
Other users on the network will see the In Use By [x] status. To
make this device available for use by any computer, click the
Disconnect icon
The USB device is in use by another computer. You cannot use this
device until the other computer finishes disconnects from that device
(making the device available again).
Note: The text in brackets shows the name of the 'client' that is using
that device. This client name is obtained from the computer's name (as
specified when that computer was setup). You can also change this
name in the USB Server's LOCAL SETTINGS tab.
The USB printer (either a printer or a multifunction printer) has been
Connect button under the ACTION column.
red
Page 20
Advertisement
Table of Contents
