Keyspan USB Server Version 1.3.1 User Manual page 14

MACINTOSH NOTE:
Auto-Connect feature for Windows is configured differently on Mac OS X systems. If
you are interested in using the Auto-Connect feature for Mac, please skip ahead to the
Using The Auto-Connect Feature For Mac subsection.
Before You Begin
Before you begin, please make sure that you have connected and installed your printer via the
Keyspan USB Server's USB Devices tab (see the Using Your First USB Device sub section
earlier in the section).
To setup your printer for Auto-Connect, please follow these instructions:
Step 1
- Access The USB Server System Tray Icon And Auto-Connect Settings
Right click the USB Server icon in the System Tray.
When the sub-menu appears, select to Auto-Connect SETTINGS.
This will open the Keyspan Auto-Connect window.
Step 2
- Add Your Printer To Auto-Connect
In the Keyspan Auto-Connect window, click the check box next to your printer's name.
Tech Note: If You See Multiple Selections For The Same Printer:
US4A/PS4A:
You may see your printer listed multiple times if you or your printer's software created
multiple printers in Windows's Printers and Faxes window. You can either delete
This User Manual applies to the Keyspan USB Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23
Keyspan:USB Server - User Manual
Page 14