Table of Contents
Advertisement
Using The Auto-Connect Feature For Mac
This feature will automatically connect and disconnect printers whenever you have a print job
queued. This gives you a richer printing experience that is similar to using a print servers.
MACINTOSH NOTE:
Auto-Connect feature for Windows is configured differently on Mac OS X systems. If
you are interested in using the Auto-Connect feature for Windows, please read the Using
The Auto-Connect Feature For Windows subsection earlier in this section.
Before You Begin
Before you begin, please make sure that you have connected and installed your printer via the
Keyspan USB Server's USB Devices tab (see the Using Your First USB Device sub section
earlier in the section).
To setup you printer for Auto-Connect, please follow these instructions:
Step 1
- Access The USB Server and Click The Auto-Connect Settings Button
Open the Keyspan Server Utility application. This application is located in your Applications
folder and is called Keyspan USB Server.
Once you have opened the Keyspan Server Utility application, click the Auto-Connect Settings
button as shown below:
This will open the Auto-Connect Printer Settings window.
Step 2
- Enable Auto-Connect For Your Printers
In the Auto-Connect Printer Settings window, you will see printers that are connected to your
USB Server(s). To enable Auto-Connect for your printer, check the check box next your printer's
name (as shown below).
This User Manual applies to the Keyspan USB Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23
Keyspan:USB Server - User Manual
Page 17
Advertisement
Table of Contents
