Keyspan USB Server Version 1.3.1 User Manual page 16

Once you've found the USB Server icon, right click the icon. This will bring up a sub menu (see
next image).
In the sub menu:
• ABOUT KEYSPAN SERVER SOFTWARE will open an about window that displays the
currently installed software versions.
• SERVER UTILITY will open the Keyspan Server Utility application. This is the same as
opening the Keyspan Server Utility application via the START menu.
• AUTO-CONNECT SETTINGS will open the Auto-Connect window. This is where you
configure your printers to use the Auto-Connect window. For details about this feature,
please read the Using Auto-Connect For Printers section earlier in this guide.
• CONNECT TO DEVICES allows you to connect to available USB devices without having
to open the Keyspan USB Server program. To do this, just select your device from the list.
USB devices connected to your computer will show a check mark next to them. USB
Devices connected to other computers will not show up
Please note that this is the same thing as opening the Keyspan Server Utility software
and manually connecting your device.
disconnecting USB devices faster and easier.
• EXIT will quit the Keyspan USB Server System Tray icon. IMPORTANT!!! If the
Keyspan System Tray is not running (ie you selected exit), your printers will not Auto-
Connect. To fix this, restart your computer or re-launching the KEYSPAN USB Server
TASK from START menu -> PROGRAMS -> STARTUP
This User Manual applies to the Keyspan USB Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23
Keyspan:USB Server - User Manual
The System Tray icon makes connecting and
Page 16