Keyspan US-4A User Manual page 45

Server IP Address Override:
This User Manual applies to the Keyspan USB Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23
Keyspan:USB Server - User Manual
device is not in use. Please note that if your computers
automatically 'sleep' (aka 'hibernate', 'power save', etc.), USB
devices connected to the sleeping computer will be released
and made available to other users. Turning off your
computer will also release USB devices left in use
The Server IP Address Override command is used to 'force
configure' a USB Server that is on your local network but not
shown in the Servers tab. This is common for USB Servers
installed on Static IP based networks. When you select this
command, the Server IP Address Override will open. In
this window, enter the serial number of the USB Server (the
last five digits of the Network Address printed on the bottom
of your USB Server) and the IP settings that you want to send
to the USB Server
Page 45