Keyspan US-4A User Manual page 34

Keyspan:USB Server - User Manual
Device Configuration: Device Names, IDs & Serial No.
The USB Device Name displays the name programmed into your
USB device. This name is shown in all of the USB Server
windows unless an alternate name is specified in the Alternate
Name field.
The Vendor ID and Product ID fields will show the USB Vendor
ID and Product IDs (aka VID and PID) that are programmed into
your USB device.
The Location ID shows the location of the selected device on the
USB Server. For example, if the Location ID shows '0x2', your
USB device is located on USB port# 2 on the USB Server
hardware.
The USB Serial No. field shows the serial number, if any,
programmed into your USB device.
Device Configuration: Alternate Name
The Alternate Name field allows you to change the name of the
selected USB device on a particular server.
Device Configuration: Password
Turn on the Requires Password to Connect check box to only
share the specified USB device with users that have the password
to that USB device. When users first attempt to connect to a
password protected USB device, they will receive a dialog asking
them to enter a password prior to using the USB device. User can
then opt to store passwords locally in the Local Settings tab so that
they do not need to reenter password every time they want to use
that USB device.
Device Configuration: Connection Type/Client Name
The Connect Type pop-up determines if the specified device is
can shared with with multiple users (Subscription mode) or if the
USB device is only to be used with one particular user/computer
(Dedicated mode).
If you set the Connection Type to Dedicated, you will need to
enter the Client Name of the user/computer that you want to
dedicate the selected device to. To determine what a particular
user's/computer name is, on that computer, click the Local
Settings tab in the Keyspan Server Utility software.
This User Manual applies to the Keyspan USB Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23 Page 34