Keyspan US-4A User Manual page 26

continued on next page...
This User Manual applies to the Keyspan USB Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23
Keyspan:USB Server - User Manual
ACCESS tab: Server Name/Server Config Password
Edit the Server Name field to change the name of the selected
USB Server. This name will appear to anyone using the Keyspan
USB Server application.
ACCESS tab: Connect Mode
The Connect Mode pop-up menu allows you to change how USB
devices get connected to your client PCs.
Multi-User (default setting): Use this mode if you have more than
one client computer connected to the Keyspan USB Server. Prior
to using your USB device, you will have to click the USB Devices
tab's CONNECT button. USB devices will be shared on a one-
user-at-a-time basis. Use this mode if you have more than one
client PC and if all attached USB devices will be used as
subscription devices. Note: You can use the Auto-Connect feature
to automate the process of connecting/disconnecting your devices.
Single-User: Use this mode if there is only one client computer
(or if only one client computer will be powered on at a time and
connected) to the Keyspan USB Server. In this mode it is not
necessary to manually connect and disconnect USB devices. All
devices on the USB Server will be automatically connected to the
client computer.
computers will cause unexpected results as all of the computers
will attempt to get exclusive access to your USB Server.
WARNING: Using this mode with multiple
Page 26