Changing Usb Server's Settings; Overview; Editing A Specific Usb Server - Keyspan US-4A User Manual

4 Changing USB Server's Settings

Overview

The Keyspan USB Server comes preconfigured for use with most networks. However, you may
want to change some of the Keyspan USB Server's settings to meet specific needs posed by your
network and/or USB device sharing needs. This section describes how to change the USB Server's
settings and what the settings affect.

Editing A Specific USB Server

To change the USB Server's Servers settings, launch the Keyspan Server Utility application.
MACINTOSH NOTE:
The Keyspan Server Utility application is located in your Applications folder.
Double click the Keyspan USB Server icon.
WINDOWS NOTE:
The Keyspan Server Utility application is located in your START menu ->
PROGRAMS -> KEYSPAN Server.
Once the Keyspan Server Utility application is open. Click on the Servers tab (see next image):
The Servers tab will show any USB Server hardware it finds.
The Servers tab shows the following information:
Server #: Displays the last five numbers of your USB Server's Network Address/Mac
Address. The full Network Access is printed on the bottom of your USB
Server hardware.
Server Name: The name of your USB Server. You can modify this name by selecting the
server and clicking the Edit Server Config button.
This User Manual applies to the Keyspan USB Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23
Keyspan:USB Server - User Manual
Page 22