Keyspan US-4A User Manual page 21

Password Required:
Reserved/Dedicated:
Connected Dedicated:
Dedicated To [x]:
You may now proceed to the next section in this guide...
This User Manual applies to the Keyspan USB Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23
Keyspan:USB Server - User Manual
setup for Auto-Connect (the feature that automatically
connects/disconnects printers when you print). You cannot 'connect' to
a Auto-Connected printer as this is done for you automatically by the
Keyspan Server Utility software.
Note: For information on how to setup your printer for Auto-Connect,
please read the Using Auto-Connect Feature For Windows/Mac
subsections earlier in this document.
The USB device requires a password before you can connect to it.
You can password protect individual USB devices by editing your
USB Server's settings in the Servers tab and then setting a password
in the USB Device Configuration tab. For details about this tab,
please read the USB Device Configuration tab subsection later in
this document.
The USB device is reserved/dedicated to your computer. Other
computers will show the device as Dedicated To [x]. You can
dedicate a single USB device to specific computer by editing your
USB Server's settings in the Servers tab and then setting a password
in the USB Device Configuration tab. For details about this tab,
please read the USB Device Configuration tab subsection later in
this document.
The USB device is reserved/dedicated to your computer. Other
computers will show the device as Dedicated To [x]. You can
dedicate a single USB device to specific computer by editing your
USB Server's settings in the Servers tab and then setting a password
in the USB Device Configuration tab. For details about this tab,
please read the USB Device Configuration tab subsection later in
this document.
The USB device is reserved/dedicated to another computer. You
cannot connect connect to a device that is dedicated to another
computer. You can dedicate a single USB device to specific computer
by editing your USB Server's settings in the Servers tab and then
setting a password in the USB Device Configuration tab. For
details about this tab, please read the USB Device Configuration tab
subsection later in this document.
Page 21