Applying/Canceling New Server Settings; Restoring Default Settings - Keyspan US-4A User Manual

Keyspan:USB Server - User Manual
Applying/Canceling Server Settings
Once you have changed the server's settings, you will need to apply your changes in order for the
changes to take effect. To do this, click the Apply button (see next image).
Once you Apply your changes, the USB Server (hardware) will disconnect any users connected to
it and restart itself. Please note that your USB Server will disappear temporarily from the Keyspan
Server Utility application while it is restarting.
If you do not want to keep the changes that you made, cancel your changes by clicking the Cancel
button. Your USB Server hardware will not be restarted.

Restoring Default Settings

You can reset the USB Server to factory settings by using the Keyspan Server Utility application.
To do this, select and edit your USB Server (as detailed earlier in this section) and then click the
Restore Defaults button (see next image).
This User Manual applies to the Keyspan USB Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23 Page 35