Pre-Operation Instructions; Unpacking And Product Confirmation; Product Confirmation - Mitsubishi Electric FR-A7NP E kit-SC Instruction Manual

1

PRE-OPERATION INSTRUCTIONS

1.1

Unpacking and product confirmation

Take the plug-in option out of the package, check the product name, and confirm that the product is as you
ordered and intact.
This product is a plug-in option for the FR-E700-SC series (safety stop function model) inverter.
1.1.1

Product confirmation

Check the enclosed items.
Plug-in option ............................... 1 Front cover for plug-in option ....... 1
Junction connector ....................... 1
(Refer to page 6, 8.)
CAUTION
• Install a provided front cover for plug-in option in place of the inverter front cover.
REMARKS
®
• PROFIBUS is a registered trademark of PROFIBUS User Organization.
(Refer to page 6, 8.)
Spacer for plug-in option mounting.... 1
(Refer to page 6, 8.)
M3 mounting screw
(Long) (M3 × 20mm) ......................... 1
(Short) (M3 × 6mm)........................... 1
(Refer to page 6, 8.)
Hexagon spacer ................................ 1
(Refer to page 6, 8.)
1
1