PPO TYPE NON-SUPPORT SPECIFICATION
8.5
Buffer memory details
The following indicates the buffer memory details of the PROFIBUS profiles.
(1) PKW
Name
Bit
PNU
0 to 10
SPM
11
PKE
AK
12 to 15
66
PNU number (Together, the PNU and the IND define which data word is being
accessed.)
Not used (0 is set)
[Command request]
Value
0
No task
1
Parameter value is requested (read request)
2
Parameter value (word) is changed (write request)
Other than the above Non-supported
[Command response]
Value
0
No response (Busy status)
1
Inverter can accept data (Ready status)
Command execution error (error number is stored into
7
PWE (Refer to page 68.))
8
No operation change rights
Other than the above Not used
Definition
Operation
Operation