Table of Contents
Advertisement
(3) Operation mode switching method
When "0 or 1" is set in Pr. 340
Switching through the network
Switch to External
operation mode
through the network.
Network operation
When "10" is set in Pr. 340
Network operation
For the switching method with the external terminal, refer to the Inverter Manual.
Refer to page 54 and 75 for the switching method through the network.
CAUTION
• When starting the inverter in Network operation mode at power ON or an inverter reset, set a value other
than "0" in Pr. 340. (Refer to page 19)
• When setting a value other than "0" in Pr. 340, make sure that the initial settings of the inverter are correct.
External operation
Switch to Network operation
mode through the network.
Press
on the PU to light
Press
on the PU to light
INVERTER SETTING
Switching with the PU
Press
on
the PU to light
Press
on
the PU to light
PU operation
PU operation
21
4
Advertisement
Table of Contents
