G6 Crop Cruiser Series 2 Operators Manual - Software Update Supplement
Press the Left or Right arrow touch buttons to Increase or
Decrease the Density Factor by 0.001 increments.
Press & hold the clean page touch button to
access.
Press the Left or Right arrow touch buttons
to Increase or Decrease the Density Factor by
0.001 increments.
Press & hold 'Fill Vol' button to record a
fill memory volume, press once to get this
volume, press again to fill to full tank.
New drop-down warnings from the top of the
display. These will self-clear or push the "clean
page button" to clear them.
8
More colour functions are now included in the Push button
pad.
The Push button pad light now includes more
color functions:
•
Green / Blue = On
•
Yellow = Waiting
•
Solid Red = Error
•
Alternating Red & Green or Blue
= Running with error (eg, pump under
speed).
An External Buzzer will now sound once when
the desired tank volume is achieved.
Both the internal and external displays can
now be used at the same time. You can turn
the pump On at the external fill station and Off
in the cabin if required.
Virtual controls are for diagnostic use only.
Updated 'Home' screen showing Boom XRT Option sensor heights.
Optional XRT
Boom XRT sensor heights (if XRT option is
fitted) are now displayed on the Home screen
next to the sensor status icons.
GA8701177 REV 2 SUPPLEMENT SEPT 2022