Plumbing/Boom Sections; Plumbing/Tank Levels; Hydraulics - Goldacres G6 Crop Cruiser 2 Series Software Update

Software Upgrade Supplement - G6 Crop Cruiser Series 2 Operators Manual
Updated 'Plumbing/Boom Sections' screen showing the additional Virtual Switch Box 'Enable' & 'Help (?)' touch buttons
(refer G6 Crop Cruiser Series 2 Manual page 76).

Plumbing/Boom Sections

Additions on the updated 'Boom Sections'
screen include:
• Virtual Switch Box with an 'Enable'
touch button
The 'Enable' On/Off switch is added
to activate or de-activate the Boom
Section switches on the G-Hub Home
screen
• 'Help (?)' touch button.
Updated 'Plumbing/Tank Levels' screen showing the now functional Transfer Tank Vol to RCM 'Enable' & 'Help (?)' touch
buttons (refer G6 Crop Cruiser Series 2 Manual page 79).
GA8701177 REV 2 SUPPLEMENT SEPT 2022

Plumbing/Tank Levels

Additions to the updated 'Tank Level' screen
include:
• RCM Link 'Transfer Tank Vol to RCM'
now functional 'Enable' touch button
Press the 'Enable' touch button to
choose On or Off - displays Green
when On & Grey when Off.
• The Tank Vol Difference (L)' is the trigger
point to update the RCM volume.
• 'Help (?)' touch button.
Updated 'Plumbing/Tank Calibration' screen with removal of the Tank Calibrarion function and the addition of the 'Help (?)'
touch button (refer G6 Crop Cruiser Series 2 Manual page 79).
Plumbing/Tank Calibration
Updated 'Tank Calibration' screen includes
the removal of the Product Tank Calibration
function and the Addition of the 'Help (?)'
touch button.
Updated 'Hydraulics' screen showing the now functional 'Variable Fan Speed' & 'Low Limit PWM' touch buttons and the
'Help (?)' touch button (refer G6 Crop Cruiser Series 2 Manual page 80).

Hydraulics

Additions to the updated 'Hydraulics' screen
include:
• Engine Fan 'Variable Fan Speed' &
'Low Limit PWM' are now functional
• Fill Pump 'Spool Valve' setting for
future PWM valve - must be set to 100
for non PWM valves.
• 'Help (?)' touch button.
13