Mini Tower Computer - Back-Panel Connectors - Dell OptiPlex 745c Quick Reference Manual

1 cover-release latch
2 padlock ring
3 voltage selection switch Your computer is equipped with a manual voltage-selection switch.
4 power connector
5 back-panel connectors
6 card slots
Mini Tower Computer — Back-Panel Connectors
9
This latch allows you to open the computer cover.
Insert a padlock to lock the computer cover.
To help avoid damaging a computer with a manual voltage-selection switch, set
the switch for the voltage that most closely matches the AC power available in
your location.
NOTICE:
The voltage selection switch must be set to the 115-V position even
though the AC power available in Japan is 100 V.
Also, ensure that your monitor and attached devices are electrically rated to
operate with the AC power available in your location.
Insert the power cable.
Plug serial, USB, and other devices into the appropriate connectors (see "Mini
Tower Computer — Back-Panel Connectors" on page 11).
Access connectors for any installed PCI and PCI Express cards.
1
8
2 3 4
7
Quick Reference Guide
5
6
11