Transformation Of An Usb Port Into A Serial Port - Robotis USB2Dynamixel User Manual

１-４-４. Transformation of an USB port into a Serial port
T he USB2Dynamixel can be used to transform an USB port into a serial port for a PC without a serial
port such as a laptop computer.
Do not connect to an equipment that consumes more than 500mA, which may
damage the USB board.
Caution
User's Manual
Set the function selection switch to RS 232
m ode.
The CM-5 communicates using a serial port.
When the USB2Dynamixel is used, the
n etwork with CM-5 can be made even using
a n USB port of a PC. For further information
o n this, please refer to the CM-5 manual
The ZIG2Serial can
using USB2Dynamixel. For this type of
operation,
w ithout additional power supply. For further
in formation
Z IG2Serial manual.
7
be used as an USB port
the ZIG2Serial can be used
on this, p lease refer to the