Robotis USB2Dynamixel User Manual page 15

User's Manual
If there is a problem on the connection of the USB2Dynamixel, an error message appears
as below. If the OK button is pressed, the Dynamixel Manager is implemented as below.
In this case, restart from the Step 4 referring to the Connection menu of the Dynamixel
Manager after checking the connection between the USB2Dynamixel and the PC.
If there is a problem on the connection between the USB2Dynamixel and the dynamixel,
an error message appears as below. In this case, restart from the Step 5 referring to the
C onnection menu of Dynamixel M anager after checking the status of the connection
between the USB2Dynamixel and the dynamixel and the status of power supply.
14