Table of Contents
Advertisement
Quick Links
PLATINUM SMART-HEAT™
ELECTRIC HEATER SERIES II
BY BROMIC
INSTALLATION, INSTRUCTION
AND SERVICE MANUAL
FOR MODEL 4500W
!
IMPORTANT
READ THIS MANUAL CAREFULLY.
SEE INSIDE COVER FOR IMPORTANT
INFORMATION ABOUT THIS MANUAL. KEEP
ORIGINAL INSTRUCTIONS
INSTRUCTION WITH APPLIANCE FOR FUTURE
REFERENCE.
Version 1.1 AU/UK/US
Advertisement
Table of Contents
Related Manuals for Bromic Heating Platinum Smart-Heat Electric II
Summary of Contents for Bromic Heating Platinum Smart-Heat Electric II
- Page 1 PLATINUM SMART-HEAT™ ELECTRIC HEATER SERIES II BY BROMIC INSTALLATION, INSTRUCTION AND SERVICE MANUAL FOR MODEL 4500W IMPORTANT READ THIS MANUAL CAREFULLY. SEE INSIDE COVER FOR IMPORTANT INFORMATION ABOUT THIS MANUAL. KEEP ORIGINAL INSTRUCTIONS INSTRUCTION WITH APPLIANCE FOR FUTURE REFERENCE. Version 1.1 AU/UK/US...
- Page 2 IMPORTANT This manual contains important information about the installation, operation, and maintenance of Platinum Smart-Heat™ Electric Heaters. Please pay close attention to the important safety information shown throughout this instruction manual. Any safety information will be accompanied by the following safety alert symbols: DANGER, WARNING, IMPORTANT...
-
Page 3: Table Of Contents
CONTENTS IMPORTANT NOTES & WARNINGS PRODUCT OVERVIEW PRODUCT DESCRIPTION SPECIFICATIONS PRODUCT FEATURES HEATER INSTALLATION INSTRUCTIONS CEILING & WALL MOUNTING CEILING RECESS (SOLD SEPARATELY) TUBE SUSPENSION (SOLD SEPARATELY) ELECTRICAL INSTALLATION 13-15 SERVICING TROUBLESHOOTING bromic.com... -
Page 4: Important Notes & Warnings
IMPORTANT NOTES AND WARNINGS WARNING Do not paint any surface of the heater. • Certain materials or items, when stored under or near the appliance, • IMPORTANT - Installation MUST be carried out by a licensed and • will be subjected to radiant heat and could be seriously damaged. authorised person. -
Page 5: Product Overview
IMPORTANT NOTES AND WARNINGS CONTINUED This heater is not equipped with a device to control the room Do not bend the electrical connection to the power supply. • • temperature. Do not use this heater in small rooms when they are Do not pull on the cable or subject it to traction force. -
Page 6: Heater Installation Instructions
HEATING INSTALLATION INSTRUCTIONS CEILING & WALL MOUNTING The stated clearance to combustible materials represents surface temperature of 65°C (117°F) above room temperature. Building material with a low heating Application for land and coastal installations ONLY tolerance (such a plastic, vinyl siding, canvas, tri-ply etc.) may subject to Heaters must be installed according to the minimum degradation at lower temperature. - Page 7 HEATING INSTALLATION INSTRUCTIONS *Dimensions shown in mm (inches) OPTION 1 To exit the cable through the side of the wall mounting bracket, start from step 1. 1. Unscrew and remove grey screw plug from the wall bracket (a). 2. Attach the supplied metal cable gland (b) into the same hole from the outside of the bracket.
- Page 8 9. Fit the smaller cover over the heater bracket so that the slots pass over the shafts of the M6x14mm mounting screws (i). Fit the larger cover over the HEATING INSTALLATION INSTRUCTIONS smaller cover in the same way from the opposite side of the bracket (j). 8.
-
Page 9: Ceiling Recess (Sold Separately)
HEATING INSTALLATION INSTRUCTIONS CEILING RECESS KIT INSTALLATION (SOLD SEPARATELY) FOR INFORMATION ONLY Ceiling Recess Kit Application Standard - 4500W Marine - 4500W Region AU/NZ EU/UK/US/CA AU/NZ EU/UK/US/CA Part Number 2623000 BH3623000 2623001 BH3623001 Material Brushed Stainless Steel 304 Brushed Stainless Steel 316 WARNING WARNING Instructions below are suitable for ceiling surfaces... - Page 10 HEATING INSTALLATION INSTRUCTIONS CEILING RECESS KIT INSTALLATION (SOLD SEPARATELY) NOTE: The thickness of the ceiling surface dictates which locator hole to use. The fastening screws must be inserted into a strong non-combustible structural members that can easily support the weight of the heater. Your installation may require re-enforcing before the frame can be safely installed.
-
Page 11: Tube Suspension (Sold Separately)
HEATING INSTALLATION INSTRUCTIONS TUBE SUSPENSION (SOLD SEPARATELY) REFER TO TABLE FOR TUBE SUSPENSION KIT CONFIGURATIONS • Tube Suspension Kit Application Standard Marine Material Brushed Stainless Steel 304 Brushed Stainless Steel 316 Kit Description* 23.62” (600mm) 47.24” (1200mm) 23.62” (600mm) 47.24”(1200mm) Part Number AU/NZ 2620243 2620244... - Page 12 HEATING INSTALLATION INSTRUCTIONS TUBE SUSPENSION (SOLD SEPARATELY) Heater must be installed according to the minimum installation clearances shown in these diagrams. CEILING MOUNTING CEILING MOUNTING ANGLED FACE DOWN Dimensions shown in mm (inches) CEILING CEILING WARNING MINIMUM DISTANCE BETWEEN HEATERS MEASURED FROM EDGE OF HEATER MUST BE AT LEAST 500mm (20”) WARNING - Outdoor...
- Page 13 ELECTRICAL INSTALLATION FOR AU/NZ/EU/UK - 220-240V FOR PART NUMBERS: WIRING DIAGRAM - 4500W MODEL SINGLE PHASE 240V SUPPLY BH3622000 STANDARD INSTALLATION* BH3622001 (INDIVIDUAL ELEMENT CONTROL) BH3622002 4500W @ 240V BH3622003 = 18.75A 2622000 (TOTAL) 2622001 CIRCUIT 1 CIRCUIT 1 CIRCUIT 2 CIRCUIT 2 EARTH ACTIVE...
- Page 14 ELECTRICAL INSTALLATION FOR US/CA 220-240V (CONT.) FOR PART NUMBERS: WIRING DIAGRAM - 4500W MODEL SPLIT PHASE 240V SUPPLY BH3622000 4500W OPTIONAL INSTALLATION* BH3622001 @ 240V BH3622002 = 18.75A BH3622003 (TOTAL) HOT LEG 1 HOT LEG 2 EARTH GREEN/ YELLOW 18.75A @240V WARNING 240 V AC Single Phase Heater HEATER ELEMENT 2 - 66% - 3.0KW - 12.50A @240V...
-
Page 15: Electrical Installation
ELECTRICAL INSTALLATION WARNING ELECTRICAL INSTALLATION This heater MUST be permanently installed by Check product label for correct voltage and an authorised/licenced person. Do not perform wattage to ensure sure power source conforms to maintenance, or carry out installation or assembly the heaters requirements.