Table of Contents
Advertisement
COBALT SMART-HEAT™
ELECTRIC HEATER
BY BROMIC
INSTALLATION, INSTRUCTION AND
SERVICE MANUAL
SUITABLE FOR ELECTRIC HEATER MODELS:
COBALT 2000W, 3000W, 4000W- AND COBALT 6000W
IMPORTANT
!
READ THIS MANUAL CAREFULLY.
SEE INSIDE COVER FOR IMPORTANT
INFORMATION ABOUT THIS MANUAL.KEEP
INSTRUCTION WITH APPLIANCE FOR FUTURE
REFERENCE.
Version 1.0 USA
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bromic Heating COBALT SMART-HEAT Series
Summary of Contents for Bromic Heating COBALT SMART-HEAT Series
- Page 1 COBALT SMART-HEAT™ ELECTRIC HEATER BY BROMIC INSTALLATION, INSTRUCTION AND SERVICE MANUAL SUITABLE FOR ELECTRIC HEATER MODELS: COBALT 2000W, 3000W, 4000W- AND COBALT 6000W IMPORTANT READ THIS MANUAL CAREFULLY. SEE INSIDE COVER FOR IMPORTANT INFORMATION ABOUT THIS MANUAL.KEEP INSTRUCTION WITH APPLIANCE FOR FUTURE REFERENCE.
-
Page 2: Table Of Contents
Email: info@bromicheating.com Web: www.bromicheating.com Note: Bromic Heating reserves the right to make changes to specifications, parts, components and equipment without prior notification. This Installation, operation and service manual may not be reproduced in any form with prior written consent from Bromic Heating. -
Page 3: Warning
If the appliance has not been used, or will not be used, for a • Do not attempt to alter the unit in any manner. Please contact Bromic Heating for further advice. long period of time, disconnect power supply •... -
Page 4: Heater Installation
HEATER INSTALLATION HEATER INSTALLATION CONTINUED... CEILING & WALL MOUNTING WARNING WARNING CEILING & WALL MOUNTING DO NOT MOUNT THE HEATER VERTICALLY! DO NOT MOUNT THE HEATER VERTICALLY! Mounting Hole Centres & Heater Position Heater MUST be installed so that the tube elements For outdoor installation heater must be mounted with are horizontal. -
Page 5: Tube Suspension
HEATER INSTALLATION HEATER INSTALLATION CONTINUED... CONTINUED... TUBE SUSPENSION TUBE SUSPENSION (SOLD SEPARATELY) (SOLD SEPARATELY) CEILING RECESS KIT Mounting Hole Centres & Heater Position (SOLD SEPARATELY) 2 LAYERS OF 16MM FIREPROOF INSULATION MUST BE INSTALLED ON ALL 1. Mark mounting hole centres on ceiling. Attach 1. -
Page 6: Element Installation
HEATER INSTALLATION ELEMENT INSTALLATION CONTINUED... WARNING This Heater MUST be permanently Installed and hard wired by an authorised/licenced person. Do Not Assemble supplied terminal blocks, wire, conduit & junction box cover. The Ceiling Recess Kit is supplied perform maintenance, or carry out installation or with 5 wires &... - Page 7 ELEMENT INSTALLATION ELECTRICAL INSTALLATION CONTINUED... imum IPX4 rating. For 2000W & 3000W models the junc- WARNING 5. Close element lock bracket & fasten with screw. tion box has one loop of cable. Cut the loop and use the Repeat for other end of heater. This Heater MUST be permanently Installed and hard two ends for the active and neutral connections for the wired by an authorised/licenced person.
-
Page 8: Electrical Installation
SERVICING ELECTRIC AL INSTALLATION CONTINUED... WARNING TUBE ELEMENT REPLACEMENT Servicing and maintenance MUST be carried out by an 1. Remove the wire cover by pulling it out from under the WIRING DIAGRAM authorised and licensed person only edge of the heater and in between reflector. EARTH 240 V AC COBALT SMART-HEAT ELECTRIC... -
Page 9: Replacement Part List
REPLACEMENT PART LIST Description PART NUMBER Heater - Cobalt electric 2000W 240V BH0610001 Heater - Cobalt electric 3000W 240V BH0610002 Heater - Cobalt electric 4000W 240V BH0610003 Heater - Cobalt electric 6000W 240V BH0610004 Front cover - Cobalt electric 2000W & 4000W BH8180030 Front cover - Cobalt electric 3000W &...
Need help?
Do you have a question about the COBALT SMART-HEAT Series and is the answer not in the manual?
Questions and answers