Table of Contents
Advertisement
GBA Z 0898 0 E
4.2
D
AILY CLEANING AND MAINTENANCE
4.2.1
G
LASS CLEANING
NOTE: The cleaning of Ceran® glass is identical to
cleaning other similar glass surfaces. You may use
any regular glass cleaning products available
from a hardware store.
You may use a razor blade scraper or a non-
scratching sponge to remove tough residues.
When scraping, place your razor blade scraper at
an angle of about 20o to 30o from the glass.
Then wipe clean the glass with a cleaning pro-
duct.
4.2.2
S
TAINLESS STEEL
1. Clean the stainless steel surface using a soft
cloth with a mild detergent and/or a foodsafe
liquid cleaner designed to clean stainless
steel.
2. Wipe dry with a soft clean cloth.
4.2.3
V
ISUAL INSPECTION OF SILICONE SEAL
Inspect the silicone seal around the glass perime-
ter. Call for service immediately if you notice:
Cracks on the silicone seal.
The silicone seal comes away from the glass/
housing or moves when you press down on
the seal.
BA
Last revised 05-2019
4.3
W
EEKLY CLEANING AND MAINTENANCE
4.3.1
A
IR INTAKE FILTER
1. The air intake filter is located on the bottom
of the appliance. To remove, slid out the filter
from the holder.
2. The filter is dishwasher-safe.
3. MUST DRY the filter before putting it back
into the holder.
In case of insufficient cleaning of the device, the
warranty expires.
4.4
Y
EARLY MAINTENANCE
Best practice: Have the induction appliance ex-
amined once a year by an authorized technician.
General maintenance tips:
Inspect all induction cookware to ensure
proper condition.
Have an authorized technician to inspect and
ensure that:
All ventilation fans are working properly.
No grease built-up around the equip-
ment and air filter.
Page 34 of 39
Mai 3, 2019
Rev. 0
Advertisement
Table of Contents
Troubleshooting
