Table of Contents
Advertisement
GBA Z 0898 0 E
3.8
A
UTOMATIC PAN DETECTION
NO PAN NO HEAT
When a temperature or a power level is selected,
the appliance supplies energy only when a pan is
placed in the cook zone.
When you remove the pan from the cook zone,
the appliance stops power output immediately.
The power output resumes, when the pan is
placed back on the cooking zone.
Notice
Switch off the cook-top by means of the con-
trol. Do not rely on the Pan Detection as the
ON-OFF control.
Notice
Pan smaller GN 1/1 is not detected by the sys-
tem.
3.9
W
HEN APPLIANCE IS IDLE
When the induction appliance is not in use, al-
ways turn off the appliance.
Notice
Switch the appliance off if you take the
cookware away for a while. This will prevent the
heating process to start automatically and unin-
tentionally when a pan is placed back on the
heating area. If any person needs to use the
induction appliance, he/she will have to turn
the appliance ON intentionally.
BA
Last revised 05-2019
,
3.10
Procedure if the device is not needed for a long
time.
1. Switch off the device on the knob.
2. Disconnect the device from the mains.
If the plug is not safely accessible, the device
must be switched off at the main circuit break-
er.
Page 30 of 39
D
ECOMMISSIONING
(See Section 3 Turning Off )
DANGER
Mai 3, 2019
Rev. 0
Advertisement
Table of Contents
Troubleshooting
