General Information; Description Of Produkt; Application; Compliances - Scholl SH/ESF 3500-ML Instructions For Use Manual

GBA Z 0898 0 E
1 G
ENERAL INFORMATION
1.1 D
ESCRIPTION OF PRODUKT
Built with a robust construction, our induction
appliances are compact and powerful with the
revolutionary RTCSmp® Technology (Realtime
Temperature Control System).
The RTCSmp® Technology monitors continuously
in realtime, the energy supply, temperature of
the cook zone and the state of the components
such as the induction coil. This monitoring sys-
tem ensures the most efficient energy transfer,
as well as maximizes safety:
 Safety functions such as Pan Detection and
Boil Dry Protection are therefore guaranteed.
 The appliance starts heating only when a pan
is placed in the cook zone.
 When a malfunction occurs, the integrated
fault diagnostic system reports the malfunc-
tion instantly.
1.2 A
PPLICATION
The RTCSmp® induction appliances are designed
as compact equipment for use on the surface of a
counter or table.
Many applications throughout the day with your
appliance are possible, such as cooking, warming
up, keeping warm, flambéing, and roasting of
food. All these applications are possible because:
 Temperature control is instantaneous and
precise. Instant energy transmission from in-
duction coil to the bottom of cookware, al-
lows for fast startup time.
 High power is possible for braising application
and quick sauté.
 High power also means you can heat up a
large stockpot quickly.
NOTE: To guarantee the reliability and perfor-
mance of the appliance, you must use the rec-
ommended types and sizes of pans with the ap-
pliance. See section 3 Operation.
BA
Last revised 05-2019
1.3 C
OMPLIANCES
CE models comply with the latest European
Norms:
 EN 55014-1
 EN 55014-2
 EN 60529
 EN 62233 (EMC/EMV)
 EN 60335-1
 EN 60335-2-36
 EN 61000-3-11
 EN 61000-3-12
1.4 S
ERIAL PLATE LOCATION
The serial plate is located on the bottom panel of
the unit. It specifies the model number, serial
number, and electrical specifications of the ap-
pliance.
1.5 M
ODEL NUMBER
The model number is located on the serial plate.
This manual covers only the models specified on
the front cover of this manual.
1.6 S
ERIAL NUMBER
Serial number is located on the serial plate.
Page 12 of 39 Mai 3, 2019
Rev. 0