Table of Contents
Advertisement
GBA Z 0898 0 E
2.1.3
I
NSTALLATION SAFETY
E
LECTRICAL
DANGER
All electrical connections must be carried out by
a certified electrical contractor, who is respon-
sible for the correct rating and installation of
the appliance. The contractor has to comply
with all legal safety regulations and all applica-
ble national and local electrical codes.
Warning
Markings and warning labels mounted directly
on the equipment must be observed at all times
and kept in a fully legible condition.
Warning
This equipment must be positioned so that the
plug is accessible unless other means for dis-
connection from the power supply, such as
circuit breaker or disconnect switch, is provid-
ed.
Warning
CE Induction Appliance only: If ground fault
current protective switches are used, they must
be designed for a minimum fault current of
30mA, Type B or B+.
Notice
Ensure the supply voltage and the line current
match the specifications given on the serial
plate affixed to the appliance. Wrong voltage
will damage the appliance. A stable power sup-
ply must be provided.
BA
Last revised 05-2019
—
Page 15 of 39
Notice
Always refer to the serial plate on the appliance
to verify the electrical data. When the data
listed on the serial plate is different than that
listed in this manual, contact the manufacturer
or the authorized representative.
Notice
All cables must be routed, protected and ten-
sion free.
Mai 3, 2019
Rev. 0
Advertisement
Table of Contents
Troubleshooting
