Table of Contents
Advertisement
Installation, Operation, & Maintenance Manual
ES-09374-1
ATTENTION
The positioner can be installed at any starting angle and operates in any position,
vertical or horizontal.
ELECTRICAL CONNECTIONS
CAUTION
Be careful when handling compressed air hoses, make sure the line is disconnected
7.1
Cable Entry
before connecting it to the positioner.
IMPORTANT
The positioner can be installed at any starting angle and operates in any position,
The cable terminals are supplied in a closed state and must be unscrewed before inserting the
vertical or horizontal.
cables.
Mechanical Installation
The positioner has one 1/2" NPT entry. Cable glands are not included.
Figure 7-1 Cable Gland and Plug
WARNING
WARNING
CAUTION
CAUTION
DANGER
Hazardous area equipment must not operate with cable entries open.
DANGER
SAFETY
The positioner must not operate in a hazardous area without its cover correctly installed.
1 - The cable gland should be installed as in the picture above.
2 - Turn the cover of the cable gland counterclockwise to open and insert the wires.
SAFETY
3 - Connect the wires to the terminals and tighten the cable gland.
NOTICE
NOTICE
34
Electrical Connections
August 23, 2022
PMS 151
C0 M55 Y100 K0
PMS 151
C0 M55 Y100 K0
PMS 109
C3.1 M2 Y91.4 K.05
PMS 109
C3.1 M2 Y91.4 K.05
PMS 186
C1.2 M92 Y92 K0
PMS 186
C1.2 M92 Y92 K0
PMS 335
C100 M0 Y63 K39
PMS 335
C100 M0 Y63 K39
PMS 285
C100 M44 Y0 K17
PMS 285
C100 M44 Y0 K17
Electrical Connections
13
8
8
Advertisement
Table of Contents
