Mounting The Guide Lever - Emerson TopWorx PD200 Installation, Operation & Maintenance Manual

Smart valve positioner
Table of Contents

Advertisement

WARNING
Installation, Operation, & Maintenance Manual
ES-09374-1
CAUTION
ATTENTION
DANGER
Before installing the positioner, check the area classification. Never use a General Purpose
The positioner can be installed at any starting angle and operates in any position,
positioner in an area classified as an explosive atmosphere.
vertical or horizontal.
CAUTION
WARNING
SAFETY
Excess pressure can permanently damage the actuator diaphragm. Check the actuator manual
Be careful when handling compressed air hoses, make sure the line is disconnected
for the maximum pressure supported.
before connecting it to the positioner.
IMPORTANT
CAUTION
NOTICE
The positioner can be installed at any starting angle and operates in any position,
When installing the mounting bracket on the positioner and then setting on the linear
vertical or horizontal.
pneumatic actuator, observe the maximum torque indicated below:
Positioner on the mounting brackets (2xM8): 15 Nm.
Mounting bracket on the linear actuator (2xM8): 15 Nm.
Mechanical Installation
DANGER
5.4.1

Mounting the Guide Lever

SAFETY
Figure 5-13 Assembling the Guide Arm
NOTICE
Mechanical Installation
C0 M55 Y100 K0
Mechanical Installation
PMS 109
August 23, 2022
C3.1 M2 Y91.4 K.05
PMS 186
C1.2 M92 Y92 K0
PMS 151
PMS 335
C0 M55 Y100 K0
C100 M0 Y63 K39
PMS 109
PMS 285
C3.1 M2 Y91.4 K.05
C100 M44 Y0 K17
PMS 186
C1.2 M92 Y92 K0
PMS 335
C100 M0 Y63 K39
PMS 285
C100 M44 Y0 K17
8
13
21

Advertisement

Table of Contents
loading

Table of Contents