2- Safety
Service
€
Always pressure test with clean water before filling with chemicals. Do not remove the hose if the machine is turned
on.
€
DANGER! Do not exceed the maximum recommended r.p.m.
€
Rinse and wash out the equipment after use and before servicing.
€
Do not remove the hose if the machine is turned on. Always replace all safety devices or shields immediately after
servicing.
€
Disconnect the power supply before servicing, and de-pressurise the equipment after use and servicing.
€
If an arc welder is used on the equipment, disconnect any power leads before welding.
€
Remove all inflammable or explosive materials from the area.
€
The External Cleaning Device should not be used if any part of the equipment has been damaged, including safety
devices, high-pressure hoses, etc.
.
8