Table of Contents
Advertisement
5-1. About user parameters
The Scalapro
™
allows you to change the settings to best fit for your needs and applications. Change the
settings as needed, referring to the upcoming user parameter table.
5-2. How to set a user parameter
Press
The panel shows the user parameter #01 and its setting.
Use the following keys when you set a user parameter.
&
[IMPORTANT]
When you have changed a setting, be sure to press
turning off the power.
Unless you switch to the next parameter, any changes you made to the setting will be lost.
5-3. User parameter table
Number
#01
Checkweighing function
#03
LED lighting timing
(parameter for multi-function)
#05
Automatic power OFF time
Flashing of indicated value per
#07
evaluation
(parameter for checkweighing
function)
Operation
and
at the same time.
Switches to the next
parameter.
Returns to the previous
parameter.
Setting
Item
Description of options
value
(The underlined option is the factory setting.)
0:
Disable the checkweighing function
1:
Simplified checkweighing function
Inspection checkweighing function
2:
(The upper and lower limits are set using the measured weight of a
sample as the middle value.)
0:
Disable LED
1:
LED ON upon underweight
2:
LED ON upon proper weight
3:
LED ON upon overweight
4:
LED ON upon underweight and flashes upon overweight
0:
Disable automatic power OFF function
1:
5 minutes
2:
10 minutes
3:
15 minutes
4:
30 minutes
5:
60 minutes
0:
Disable flashing
1:
Flash upon underweight
2:
Flash upon proper weight
3:
Flash upon overweight
4:
Flash upon underweight or overweight
5:
Synchronize with #03 (LED lighting timing)
5. User parameters
Display
Increases the parameter setting by 1
Decreases the parameter setting by 1.
to switch to the next parameter before
Hide quick links:
Advertisement
Table of Contents
