Page 2
192.168.100.101. If the main processor is on a eDAQXR-lite Quick Start Guide coil the cable in a loop. network with a DHCP server, use the HBM Device USB flash drive 2. Connect the 1-KAB2106 Ethernet cable from the HOST Manager (on the included USB drive) or contact your IT connector to the host PC.
Page 3
Failure to comply with safety requirements could result in bodily injury or damage to property. Only disassemble layers in ESD safe Mixed layers stack (D and J): First install New-design layers (J) on the eDAQXR-lite using hex head screws (L) and the conditions.