Page 1
Scan the QR code with your mobile device or follow the link to helpful videos and specifications related to this product. https: STAND- / /vivo us.com/pr Table o ducts/ stand v003e Stand Tools Re Stand q uir Table e Stand d : STAND-...
Page 2
Asse Stand m bly Steps Ste Stand p s Ste Stand p 3 Ste Stand p 1 Screw pole connector (G) to pole (E) Use the Allen wrench and then add pole (F). Use Allen (N) to tighten the wrench (M) to tighten down the screws (K) into the grub screws on the pole connector.
Page 3
Ste Stand p 6 Ste Stand p 5 (O (x1)ption A) Slide monitors onto all brackets. Ste Stand p 7 For flat back monitor, secure VESA plate (A) to monitor using screws (M-A or M-C) and washers (M-E). Ste Stand p 5 (O (x1)ption B (x1)) Add parts (J) and For the single Use the built in adjustment...
Page 4
Call: 1-800-371-5654 If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functional product. For more VIVO products, check out our website at www.vivo-us.com. Last updated: 4/30/2018...
Need help?
Do you have a question about the STAND-V003E and is the answer not in the manual?
Questions and answers