Advertisement
Table of Contents
Triple Vertical Monitor Desk Mount
Instruction Manual
SKU: STAND-V003V
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v003v
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Table of Contents
Related Manuals for Vivo STAND-V003V
Summary of Contents for Vivo STAND-V003V
- Page 1 Triple Vertical Monitor Desk Mount Instruction Manual SKU: STAND-V003V Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v003v GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Tools Needed
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 33 lbs Failure to do so may result in serious injury. (15 kg) PER ARM Phillips Drill Screwdriver ASSEMBLY STEPS PRE-ASSEMBLY Remove the grub screws by provided Allen Key (o). Connect the poles by threads as below diagram. Install the grub screws and fasten them by provided Allen Key (o). - Page 4 STEP 1 (Continued) OPTION B: Existing Grommet Base Installation If the existing grommet hole comes with a plastic protector, remove it to ensure a flat surface before installing the desk mount. Install the Grommet Base Plate (m) to the Pole (a) using 3pcs M5x14 Bolts (g), and tighten using the Allen Key (o), see Figure 4.
- Page 5 STEP 2 Install Monitor Arm (d) to the Pole (a). Fasten the bolt with supplied Allen Key (o). Attach the Wire Clip (n) to the pole (a). STEP 3 OPTION A: Flat Back Monitor For flat back monitor, install VESA Plate (e) to monitor using thumbscrews (q).
- Page 6 STEP 4 Slide the monitor onto the head of Monitor Arm (d) as shown in the above diagram. Install the M4x6 Bolt (f). Make sure the bolt is installed before you rotate the monitor.
- Page 7 STEP 5 Fasten the grub screw in Monitor Arm to fix the tilting angle by provided Allen Key (o). Manage the wires as shown in the diagram below. grub scre w...
- Page 8 - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V003V and is the answer not in the manual?
Questions and answers