Understanding Error And Other Messages - i-SENS CareSens N Owner's Booklet

Step 4
On pressing , the number indicating the
minute will start blinking. Press to set the
accurate minute.
Step 5
Press the S button to finish and to enter the
'alarm 2' mode.
Repeat steps 2 to 5 to set the remaining
time alarms (alarm 2-3).
Step 6
Press the S button for 3 seconds to finish
and turn the meter off.
40 www.i-sens.com
Understanding Error and Other Messages
Message What It Means
A used test strip
was inserted.
The blood or control
solution sample was
applied before the
symbol
appeared.
The temperature
during the test was
above or below the
operating range.
What To Do
Repeat the test with a
new test strip.
Repeat the test with a
new test strip and
wait until the
symbol appears
before applying the
blood or control
solution sample.
Move to an area where
the temperature is
within the operating
range (5-50˚C) and
repeat the test after the
meter and test strips
have reached a
temperature
within the operating
range.
41