–
SATA Controller
This item enables/disables SATA devices.
–
Configure SATA As
Set as AHCI or RAID when SATA controllers are enabled.
–
Support ALPM
This item enables/disables the ALPM protocol for Advanced Host Controller
Interface-compliant SATA devices.
–
SATA Port 0~7
This item enables/disables SATA ports 0 ~ 7.
–
Hot Plug Port 0~7
This item designates SATA ports 0 ~ 7 as supporting hot plugging.
–
SATA Port 0~7 Spin Up Device
On an edge detection from 0 to 1, the PCH starts a COMRESET initialization
sequence to the device.
–
SATA Port 0~7 Device Type
This item is used to identify if the SATA is connected to an SSD or HDD.
ASMB-925 User Manual
60